BYXDZ - TM472 WHITE LATEX TRAFFIC PAINT

  • MSDS: BYXDZ
  • Manufacturer: AMERITONE PAINT CORP
  • Product Name: TM472 WHITE LATEX TRAFFIC PAINT
  • National Stock Number: 8010-00N063635
Product Identification

Product ID:TM472 WHITE LATEX TRAFFIC PAINT
MSDS Date:07/01/1993
FSC:8010
NIIN:00N063635
MSDS Number: BYXDZ

Responsible Party
AMERITONE PAINT CORP
190
LONG BEACH, CA 90801
US

Emergency Phone: 303-623-5716;800-424-9300(CHEMTREC)

Info Phone: 310-639-6791

Cage: FO133

Contractor
AMERITONE PAINT CORP/COMPTON, CA 90221
190 LONG BEACH, CA 90801 US

Telephone: 310-639-6791

Cage: FO133

Ingredients

HVR/AIR.

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 40%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


LTR/AIR.

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 35%

OSHA PEL N/K

ACGIH TLV: N/K


HVR/AIR.

Fraction By Weight: 15%

OSHA PEL N/K

ACGIH TLV: N/K


ETHANOL, 2-(2-BUTOXYETHOXY)-; (DIETHYLENE GLYCOL MONOBUTYL

CAS: 112-34-5

RTECS: KJ9100000

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K


HVR/AIR.

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


31.7 LBS/GAL.

RTECS: 9999999VO


VAP. WHEN USED IN CONFINED AREAS, WEAR NIOSH/MSHA

RTECS: 9999999ZZ


RESPS WHEN FLAME CUTTING, WELDING, BRAZING & SANDING

RTECS: 9999999ZZ


FOR RESPIRATOR USE.

RTECS: 9999999ZZ


STDS IN MIXING, APPLICATION & CURING AREAS & TO REMOVE

RTECS: 9999999ZZ


WELDING & FLAME CUTTING ON SURFACES COATED W/THIS

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: IRRITATION OF
RESPIRATORY TRACT; HEADACHE, NAUSEA, DIZZINESS. EYE/SKIN CONTACT:
MAY CAUSE IRRITATION. INGESTION: NO EFFECTS ANTICIPATED FROM
INGESTION INCIDENTAL TO NORMAL USE. LARG ER QUANTITIES MAY CAUSE
DISTRESS OF THEDIGESTIVE TRACT & NAUSEA. CHRONIC: PROLONGED AND
REPEATED (EFTS OF OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HEALTH HAZARDS: BREATHING OF SPRAY MIST AND/OR
SANDING DUST OVER A PERIOD OF YEARS MAY CAUSE DUST DISEASE OF THE
LUNGS.
Medical Cond Aggravated by Exposure:NONE WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. EYE: FLUSH WITH LARGE
AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. GET MEDICAL ASSISTANCE.
SKIN: REMOVE WITH SOAP AND WATER. REMOVE SOILED CLOTHING.
INGESTION: DRINK 1-2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE
VOMITING. CONSULT MD IMMEDIATELY. TREAT SYMPTOMATICALLY. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.

Fire Fighting

Flash Point Method:SCC
Flash Point:NONE
Lower Limits:SEE ING 4
Extinguishing Media:IN CASE OF FIRE, USE CO*2, DRY CHEMICAL, FOAM OR
OTHER NFPA APPROVED METHOD FOR TREATING A CLASS B FIRE.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
SUMMON PROFESSIONAL FIREFIGHTERS. WATER SPRAY MAY BE INEFT. IF
WATER IS USED, FOG NOZZ ARE PREF. IF(SUPDAT)
Unusual Fire/Explosion Hazard:DUE TO PRESS BUILD-UP, CLSD CNTNRS EXPOS
TO EXTREME HEAT MAY EXPLODE. AFTER WATER EVAPS, REMAINING MATL WILL
BURN. DURING EMER CNDTNS, OVEREXP TO DECOMP(SUPDAT)

Accidental Release

Spill Release Procedures:WASH WITH WATER. BEFORE ATTEMPTING CLEAN-UP,
REFER TO HAZARD CAUTION INFORMATION IN OTHER SECTIONS OF THIS MSDS.
CONTAIN SPILLED MATERIAL AND REMOVE WITH INERT ABSORBENT. STORE IN
CLOSED CONTAINER UNT IL PROPERLY DISPOSED OF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE BELOW 110F AND KEEP FROM
FREEZING. KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT REUSE EMPTY
CONTAINERS. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:DO NOT BREATHE VAPORS, SPRAY MIST OF SANDING DUST.
USE ONLY WITH ADEQUATE VENTILATION. DO NOT GET IN EYES.

Exposure Controls

Respiratory Protection:WHEN SPRAY APPLIED IN OUTDOOR/OPEN AREAS
W/UNRESTRICTED VENT & DURING SANDING/GRINDING OPERATIONS, USE
NIOSH/MSHA APPRVD MECH FILTER RESP TO REMOVE SOLID AIRBORNE
PARTICLES OF OVERSPRAY & SANDING DUST . WHEN USED IN RESTRICTED
AREAS,(SUPDAT)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP AIR CONTAM CONC BELOW CURRENT APPLIC SAFETY & HLTH (ING 10)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:REMOVE & WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
FIRE FIGHT PROC:EXPOS TO FIRE/EXTREME HEAT, WATER SHOULD BE USED TO
COOL CLSD CNTNRS & PVNT PRESS BUILD-UP/POSS AUTO-IGNIT. EXPLO
HAZ:PRODS MAY CAUSE HLTH HAZ. SYMPS MAY NOT BE IMMED APPARENT.
OBTAIN MED ATTN. RESP PROT:WEAR NIOSH/MSHA APPRVD CHEM/MECH
FILTERS DESIGNED TO REMOVE COMBINATION OF PARTICULATES & (ING 7)

Chemical Properties

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:SEE ING 4
Vapor Density:SEE INGS
Spec Gravity:1.5
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:56.4

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/MATERIALS THAT ARE INCOMPATIBLE W/WATER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE HAZ FUMES WHEN HEATED TO
DECOMP. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE & OXIDES
OF METALS IN INGS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.